클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Immobiliser. It is discreet and doesn't require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will then allow your vehicle to begin.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of aftermarket security devices including tracking systems, alarms and immobilisers. Not all of them are equally effective at protecting your vehicle. A tracking device can help you locate your vehicle in the event of it being stolen however, it won't prevent the crime. An immobiliser, on contrary, does exactly what it says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your vehicle.

The ghost device uses the buttons on your car to create a unique sequence which must be entered in order for the engine to start. This can be done via the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This is an excellent option when you wish to donate your car to valet parking or for maintenance. The immobiliser will remain in operation.

The ghost immobiliser 2 is a unique and innovative device that works in conjunction with buttons on your vehicle rather than being a standalone device. It's not just an effective deterrent for vehicle theft, but it can be used to secure any future vehicles you may own. This makes it a far more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking and ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be placed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure it works with all vehicles. It also is resistant to jamming devices which are a typical technique used by thieves to get around immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology and cannot be recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons on your vehicle like the steering wheel or centre console panels to create a unique, programmable disarm sequence. The sequence can be extended by 20 presses for extra security. The iPhone app permits only one, authenticated connection using a pairing code that is unique to the Ghost and communication between the two devices is encrypted.

The Ghost also prevents car thieves from using an additional key or replacing the ECU to bypass the immobiliser and begin the engine. The engine can only be started only if a valid PIN is entered. It is able to be operated temporarily in valet or service mode (with parameters set such as 30mph speed limit) and, therefore, you can hand your car to a valet or service without having to enter the code.

Tested for each vehicle

The autowatch ghost immobiliser fitting Ghost is the first aftermarket immobiliser on the CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a custom code. The system can be activated or deactivated through your smartphone's app, without the need for extra wires.

The standard factory immobilisers work with a transponder which is integrated into the key. This transmits a signal to the ECU. The car will start if the correct code is transmitted. However, if a transponder from a different vehicle is used instead, the immobiliser won't recognise it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It shields you from hacking or key cloning and even key theft. The only way a thief could steal your car is by physically towing it away and even then, they wouldn't be allowed to drive it.

Ghost makes use of the buttons on your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an individual PIN code that is changeable that must be entered prior to you can drive. This is done without the need for additional hardware, such as keys-fobs, and can be as long as 20 presses long. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals, so thieves cannot use sophisticated RF scanning or code grabbing technology to determine if a security system has been installed.

Ghost Immobiliser Problems is more difficult to get rid of than car alarms, which require disarming with the buttons. This makes it a great alternative to an GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You don't have to look far on social media sites to find stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without your original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It is created by creating an unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel, and centre console. This unique PIN has to be entered in conjunction with your original key fob to stop the vehicle from beginning. The unique override PIN is on the black card you will receive following your installation. It's easy to remember because there are no LED indicators.

The device is hidden in the wiring of the vehicle and ghost Immobiliser problems does not emit radio signals. Therefore, it cannot be detected using diagnostic software which can identify the security system you have installed. This makes it an excellent alternative to an alarm.

Contrary to most security systems that have a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

They can also be linked to an analog alarm, immobiliser or tracker. This should be specified prior to installation. They are also compatible with valet and service modes, and are a great alternative to a tracking device if you take your car to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen with no owner's keys. It's more easy than ever to steal your pride & joy with the availability of key cloning tools and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been cloned.

It connects directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also prevents the addition of the key to a new one or replacing the ECU to bypass the system since only the correct PIN code can allow the engine to start.

The device is hidden within your car by using buttons on the steering wheel, the centre console and Ghost Immobiliser Problems door panels. Before you can start your car, you must enter a unique, changeable PIN number that is up to 20 digits.

This is the very first aftermarket CAN-bus immobiliser that has been created. It will prevent your vehicle from being driven or started when you don't enter a PIN code first. If you're driving away with the device in motion it will display an indicator on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN at this time the indicator will continue to flash and require a new PIN code each time you attempt to start your car.