클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's simple to replace a broken window handle with the proper tools. However, it is essential to know your type of handle and the spindle's length prior to purchasing the replacement.

Older uPVC windows feature handles with cockspurs, which have spurs that protrude to lock over a cockspur wedge striker plate. These can be either left or right-handed and must be to match when replacing.

What type of lock or handle do you have? I have?

There are many windows locks and handles made of upvc each with its own advantages and purposes. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism works as intended. As time passes and with regular use, upvc window handles may become damaged or worn out, rendering them less effective and secure. In some instances, UPVC Window Handle Replacement they could even fall off completely. If you find that your window handles have fallen off, it's crucial to fix them as soon as you can. This will prevent possible break-ins and will keep your home safe.

It is a good thing that replacing your upvc window handles is a simple task that can be completed by almost anyone. With just a few tools and the right information, this is a simple procedure that should take no less than a few minutes. To get started you must identify the type of lock and handle you have on your upvc window and then identify the best double glazing replacement window.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles have spindles that run through the centre of the handle and into the frame of the window to operate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles have one screw that holds the handle to the frame of the window and are not as secure as other kinds of window handles.

Tilt and Turn Handles

Unlike the other upvc handles that are tilt and turn, these handles can be turned to open the window and turned inwards to allow for ventilation. They have a 7mm spindle in the back and are available both in right-hand and left-hand versions.

When buying replacement upvc handles it is essential to measure the spindle's length because not all handles are identical in size. Drop something in the middle of the hole to measure the length. This is the maximum size of spindle that will fit in your windows.

What is spindles?

uPVC window handles function similarly to doors. By turning the handle, you will be able to operate a latch within the frame. This unlocks the window to allow it to be opened and closed. The handles can become damaged, especially if frequently used or subjected to harsh conditions. This could mean that you have to replace your uPVC windows handles as they may not operate the window properly anymore.

There are a variety of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed to fit into the uPVC frames in different ways and each handle type uses a specific spindle to lock the mechanism fitted into the window. This is why it is important to know the kind of handle you have installed on your uPVC window so you can get the correct replacement.

The base of the handle will inform you what type of uPVC it is. A snap-in cover is over the screw that holds the base of the handle in place. When you remove this cover, you will be able see the screw that holds the handle base in place. After both screws are removed, you should be able pull the handle from the uPVC.

Once you have removed your uPVC window handle, you have to remove the spindle that was previously attached to the locking mechanism. Be sure to note the length of the spindle as you'll need to ensure that you buy an alternative that is the same length as your original handle and locking mechanism.

The main issue with most window handles made of uPVC is that the handle spindle gets worn-out and is unable to longer work with the locking mechanism. This could be due wear and tear from continuous use or a loosening of the locking mechanism, or even rust over time. When this happens it is required to replace the window handle and the locking mechanism to restore the full functionality to your uPVC windows.

How do I take off the old handle?

Window handles are susceptible to being damaged or even broken over the course of time. It is important to fix them as quickly as you can to ensure your security. It is good to know that replacing a worn or damaged handle is a easy task that can be carried out in just over an hour and doesn't require any specialist tools.

The first step to remove the old handle is to remove the screw that is located on the top of the base of the handle. Once the screw is removed, the handle can be removed. There is another screw located at the bottom of the handle's base and it can be removed too. After these two screws have been removed, the handle will be detached from the window's base.

After removing the old handle and align the fixing holes of the new handle to the holes that are already in the window frame. If there is a sticker or cap on the new handle remove it if needed and put the handle back in the appropriate position. It is important to check that the handle is working after it is put in place. Turn the handle and make sure that the lock mechanism is in place.

Espag handles have a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the frame of the window. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.

Once you have the new handle in place, slide the spindle inside the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) after the handle is fixed. The handle is now ready to use, so try opening and closing the window several times to ensure that it works properly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't difficult, and the process is quite simple. All you need is a screwdriver and a small amount of patience. The first step is ensure that the handle is in the unlocked position and then remove any screws that are visible, you can also replace these with screw caps if required. After you have removed the handle, you'll need to take note of the length of the spindle which extends from the back. This is vital because it will determine the type of handle you need to purchase.

Espagnolette handles are the most popular kind of handle that is used on uPVC windows. The spindle passes through the handle to operate the locking mechanism in the window frame. When the handle is turned, it opens the latch on the window and allows it to open. When used regularly and UPVC Window Handle Replacement over time, handles for espagnolette may be damaged.

Cadenza handles are another type of uPVC window handle commonly used on tilt and turn windows. They feature a protruding knife that is operated by a multi-point locking mechanism within the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. You can replace them using the same method that you would do for handles made of espagnolette, but make sure the new handle is angled and not flat.

After you have chosen the correct handle, simply align the new handle with the existing screw holes prior to screwing it in place. Then, you should put the screws on and test your new handle. You can do this by moving the handle back and forth from the locked position to the unlocked for a few times. It is possible to contact an expert to determine how you can fix any issues. They can provide advice on how to resolve the problem in a timely and efficient way.