클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively easy task and with the right tools it can be done quickly. It's important to know the type of handle you have and the spindle's size before you purchase the replacement.

Older uPVC window handles have a spur that extends and is locked over the wedge striker for cockspur. These can be left- or right-handed and must be compatible when replaced.

What kind of lock or handle do I have

There are a myriad of windows locks and handles made of upvc, each with its own advantages and purposes. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism works according to the plan. With time and regular usage, the window handles made of upvc may become damaged or worn out, making them less secure and effective. In some cases they might even fall off completely. If you notice that your upvc window handles have fallen off, it is essential to repair them as quickly as you can. This will help avoid burglaries and protect your home from burglary.

It's a task that anyone can complete. You'll require some basic tools, but with the appropriate knowledge, it's an easy task that will take only a couple of minutes. To begin you'll need to identify the type of lock and handle you have on your window made of upvc and then identify the best replacement.

Inline Espagnolette Handles

These are the most commonly used kind of upvc handle and are typically located on the outside of your window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles also have spindles that run through the centre of the handle, and into the frame of the window to activate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are attached to the frame of the window by a single screw and are less secure than other varieties of window handle.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles because they can be rotated for opening the window, UPVC Window Handle Replacement and then tilted into the window to ventilate. They feature a 7mm spindle on the back and are available both in right and left-handed versions.

When purchasing replacement double glazed windows handles made of upvc it is essential to measure the spindle's length because not all handles are identical in size. Drop something into the middle of the hole to check the length. This is the maximum size of spindle that will fit your windows.

What is the spindle?

uPVC window handles function in a similar way like doors, turning the handle to open an opening inside the frame. The window is then opened and closed. However, sometimes handles can be damaged, especially if they are regularly used or exposed to harsh weather conditions. You may have to replace the handles on your uPVC window if they are not operating correctly.

There are a variety of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. These handles are designed in a variety ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows so that you can replace it with the right one.

You can find out what kind of uPVC handle you are using by looking at the base section of the handle. There should be a "snap-in cover' over one screw that holds the handle base in the correct position. When you remove this cover and you'll be able to see the second screw that holds the base of the handle in position. Once both screws are removed you should be able to pull the handle away from the uPVC window.

After taking off the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You'll need purchase a replacement handles for upvc windows with the same length as the handle that was originally used and locking device.

The spindle wears out and becomes inoperable with the locking mechanism. This can be caused by corrosion, damage due to continuous use, or even a loosening locking mechanism. If this occurs, it is necessary to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.

How do I take off the handle that was previously attached?

Through time and regular use, window handles may be damaged or destroyed, and when this happens, it is essential to fix them as soon as possible to ensure the safety of your home. Fortunately, replacing a damaged or worn handle is a relatively simple job that can be carried out in just over a minute and doesn't require any specialized tools.

The first step in removing the old handle is to remove the screw located at the top of the base of the handle. After this screw is removed, the handle can then be pulled away from the base section. A second screw will be located at the bottom of the handle. It can also be removed. After these two screws have been removed, the handle will be removed from the base of the window.

After removing the old handle and align the fixing holes of the new handle to the holes already present in the window frame. There might be a small sticker or caps on the new handle, so remove the caps if needed, and then screw the handle in place. Once the handle is in place, it is important to test whether it functions by turning the handle and ensuring that the lock mechanism is activated.

Espag handles have a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the frame of the window. Cadenza windows come with blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the frame's outer or transom bar cross member inside the window.

Once you have the new handle in place, insert the spindle inside the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) once the handle is fixed. Now that the handle is in use, you can open and close the window a couple of times to make sure that it functions properly and securely.

How do I put in the new handle?

The process of changing your window handle made of uPVC isn't a big deal and the process is quite simple. You only need an screwdriver and a bit of patience. First, make sure the handle is not locked. Then, remove any screws that are visible. You can also replace them using screw caps. After the handle has been removed, you need to make a note of the length of the spindle that extends from the back of the handle. This is crucial since it will determine the type of handle you'll need to purchase.

Espagnolette handles made of uPVC are the most well-known type of handle. They feature a spindle that runs through the handle and operates a locking mechanism within the frame of the window. The handle releases the latch, allowing the window to open. During regular use and time, handles for espagnolette may be damaged.

Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding blade that is operated by a multi-point locking mechanism inside the window. They are more secure than the espagnolette handles because they are able to open from the inside. They can be replaced with the same method as espagnolette handles, however you must ensure that the new handle has an angled blade as opposed to flat ones.

After you have chosen the right handle, simply align the new handle with existing screw holes before screwing it in place. After that, you should put the screws back on and make sure the new handle is working correctly. You can do this by moving the handle between the locked position to the unlocked several times. It might be worthwhile to speak with an expert to determine if you can resolve any problems. They can often advise you on the best way to solve the issue in a speedy and efficient manner.