클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may be interested in the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. This is typically caused by screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The corners of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how severe the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, uPVC window repairs it is more likely the issue is more with the seal than the frame. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges will be damaged over time. It's easy to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the upvc repair hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a good way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges may also become disaligned as a result of wear, creating gaps where the sash and frame meet. This can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them re-aligned or replaced. The interlock may be disaligned. It is located on the hinge's side, and may need to be cleaned. In some cases it might be necessary to replace them.

The next common cause of draughts is the window seals. They can become worn down or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional immediately.