클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's simple to repair a broken window handle using the appropriate tools. It is important to know the type of handle you have and its spindle size before you purchase an alternative.

Older uPVC windows feature cockspur handles for windows. They have a spur that protrudes to secure a wedge-shaped cockspur striker plate. They can be right-handed or left-handed and should be matched when replacing.

What kind of lock and handle do I have?

There are a myriad of window locks and handles made from upvc, each with its own advantages and purposes. The type of handle you have will determine the ease to open your windows and upvc window Handle Replacement if the locking mechanism works in the way you want it to. Over time, and with regular use the upvc handles that are on your windows may get worn out and damaged. This makes them less secure and effective. In some instances, they could even fall completely off. It is crucial to fix the handles on your window made of upvc immediately if you notice they are falling off. This will prevent possible break-ins and will keep your home safe.

Luckily, replacing your window handles made of upvc is a simple task that is achievable by almost anyone. You'll require a few basic tools, but with the appropriate knowledge, it's a straightforward process that should take only a couple of minutes. You must be aware of the type of handle or lock that you have on your window. This will help you select the correct replacement.

Inline Espagnolette Handles

They are usually found on the side of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles feature a spindle running through the middle of the handle and into the window frame to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are attached to the frame of the window with a single screw and are less secure than other varieties of window handles.

Tilt and Turn Handles

In contrast to other handles made of upvc, tilt and turn handles can be turned to open the window, and tilted inwards to allow ventilation. They have a 7mm spindle at the back and are available in right and left-handed versions.

It is crucial to determine the size of the spindle when purchasing a replacement handles for upvc windows handles made of upvc. There are a few that are the exact same size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole, and then measure how far down it goes before it comes into contact with an obstruction. This is the maximum spindle length that will fit in your window.

What is spindles?

uPVC window handles function in a similar manner like doors. By turning the handle, you will be able to open a latch in the frame. The window can then be opened and shut. These handles can be damaged, especially if frequently used or exposed to harsh environments. You may have to replace the handles on your uPVC window if they are not able to operate it properly.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows to ensure that you replace it with the correct one.

The base section of the handle will tell you what type of uPVC it is. A snap-in covers should be over the screw that holds the handle's base in position. Remove this and then you should be able see the second holding screw on the opposite side of the base portion of the handle. Once both screws have been removed, you should be able remove the handle from the uPVC.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the handle that was originally used and the locking device.

The primary issue with window handles made of uPVC is that the spindle becomes worn out and cannot longer work with the locking mechanism. This can be caused by corrosion, damage due to constant use or an unreliable locking mechanism. If this happens, it will be necessary to replace the window handle as well as the locking mechanism to restore full functionality to your uPVC windows.

How do I take off my old handle?

Window handles can be damaged or destroyed over time. It is important to fix them as soon as you can to ensure your safety. Fortunately, replacing a worn or damaged handle is a relatively easy task that can be accomplished in less than an hour and doesn't require any specialized tools.

The first step to remove the old handle is to take off the screw situated at the top of the base of the handle. After this screw is removed, the handle can be removed from the base. There is another screw located at the bottom of the handle's base, and it can be removed as well. After both screws are removed, the handle can be removed from the base section of the window.

After removing the handle and fixing holes, align the holes of the new handle to the holes already present in the window frame. There might be a small cap or sticker on the new handle, so remove these if necessary and then screw the handle in the frame. Once the handle is in place it is essential to check that it works by turning the handle and making sure that the lock mechanism activates.

Espag handles have a spindle which protrudes out of the handle and slot into the multipoint locking mechanism of the window frame. Cadenza windows have blades with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross member inside the window.

Once you have installed the new handle, place the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. Once the handle is ready to use, you can open and close the window a few times to make sure that it functions correctly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't a big deal and the process is quite simple. All you require is a screwdriver, and a small amount of patience. First, make sure the handle is not locked. Then, remove any visible screws. You can also replace them using screw caps. After removing the handle you'll need to record the length of the spindle which extends from the back. This is crucial as it will determine what kind of handle you will need to buy.

Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They feature a spindle that is connected to the handle and acts as an internal locking mechanism within the window frame. The handle releases the latch and allows the window to open. When used regularly and over time, espagnolette handles may become damaged.

Cadenza handles are a type of uPVC handle that is typically used in tilt and turn windows. They feature an extended blade that works the multipoint locking mechanism inside the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. You can replace them using the same method that you would for espagnolette handles however, make sure that the new handle is angled and not flat.

Once you have determined the correct handle to purchase then you can place the new handle with the screw holes and then screw it into the appropriate position. After that, you can put the screw covers on and test the new handle. This is done by moving the handle from locked to the unlocked position and vice versa several times. If you experience any issues, it may be worth contacting a specialist to see if they can assist you in solving the issue. They will often be able to guide you on the best approach to resolve the issue in a speedy and effective manner.