클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the replacement handles made of upvc are easy to install and feel comfortable. It's crucial to understand that the handle you choose for your window has to be suitable for the window.

The key factor is the step height which is the distance from the nose of the handle to the frame or base. Other considerations include lockable mechanisms and styles.

Replacement parts

You can purchase a variety of replacement handles made of upvc. They come in many different colours and styles so there's bound to be something that will fit your existing windows. It's easy to make impulsive purchases especially when the handle breaks therefore it's a good idea to take your time and check the details prior to committing to buying a replacement. First, you need to know what type of handles made from upvc you have and what the differences are between them. The table below lists the most common handles so that you can find the right one to fit your upvc window.

Espag handles are the most commonly used and are used on the majority of modern double glazed windows. They are typically attached to the frame by two screws which screw in from above and below.

The spindle bar at the back could be of different sizes, and will determine if they are left-handed or right-handed. It is important to determine the measurements of the handle you need to ensure you order the right replacement.

Usually fixed with two bolts similar to the Espag handle, but they have a low projection from the frame which means that the arm will not penetrate your blinds. This is an ideal choice for blinds on your windows made of upvc and want to ensure that the handle will blend with them.

Cockspur handles are similar to Espag handles but they have a nose that is closed over a wedge which sits on the frame of the window. This kind of handle can be found on some older wooden and Upvc windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing on the top of the window. This opens the window from the inside and allows you to clean from outside without needing to step out onto a ladder or climb over the fence. These are ideal for those with limited mobility, and can improve security and access in the home.

Tips and hints

A lot of people will need to replace their uPVC window handles at some moment. If this occurs it's a good idea to be aware of a few tricks and tips that can assist in making the task be as smooth as it can.

Examine the type of handle that is at your home. Based on the type of handle it is attached to and what locking mechanism it is using, it may be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are blocked or getting stuck, you'll need to replace them along with the handle.

Thankfully, most uPVC handles are identical and adhere to industry standard sizes, making replacing them a easy process. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. After the screws have been removed, you will be able to take apart the handle.

It's a great idea to note how much the spindle extends from the base of the handle after you take it off it. This will allow you to determine the length of the spindle to determine an alternative handle. To do this, simply take a measurement of the square peg sticking out from the base of the handle and use it as a guide.

This is especially important for inline uPVC windows handles, as they are always straight and only open left or right. They won't work in the middle. If you're not sure of the kind of handle you have at home, it might be beneficial to get a handle from a neighbour's home and observe the way it works to get an idea.

Another great tip for working out what handed the uPVC window handle is to look at the way the handle moves when it is operating. Handed handles will turn either clockwise or anti-clockwise. If you're not sure you are, uPVC Replacement Window Handles ask someone else to open the window using the handle to see what happens.

Measure the spindle

It can be difficult to pick the correct replacement handle for your window as different handles do not have the same dimensions. It is important to accurately measure the spindle when fitting a new handle. This will ensure that the handle is suitable. There are several different types of uPVC window handles that operate in different ways, so it is vital that you know what type of handle you have and the type of locking system you have.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox and opens the window. They are typically used on uPVC windows with casement. They can be locked with keys to provide additional security.

Cockspur handles are commonly found in older double glazing replacement windows-glazed uPVC window frames. They are characterized by a "nose", which is secured by a wedge-shaped striker block. They are also easy to use and can be locked with keys. It is more difficult to replace these handles as they are less common than the handles with espagnolette.

If you have a tilt and turn uPVC window then you will need to get a special type of uPVC replacement handle that has an additional locking mechanism. It can open the window, but also rotate it around to open it fully. It is essential to select an opening handle that has a spindle that is at least 55mm to be able to reach the window frame.

You can follow the same procedure to remove and replace this type of uPVC handle, but you will need to be cautious when removing the old one. You may need to open the window a little larger than usual to ensure you get to both screws fixing it to the frame. Once you have put in your new uPVC handle and verified that it is in the right position, you are able to tighten the screws and test the lock to ensure it is working properly.

Install the new handle

Once you have the right handle replacement window glass, it's going to simply screw into the appropriate position. It will require a screwdriver, and an electric one might be more convenient. It is crucial not to overtighten the screws while screwing them into. This could cause the handle or knob to swell.

The other important step when fitting the new handle is to install the spindle. The spindle is the component which runs through the handle and operates the locking mechanism in the window. It is important that the component is properly fitted because this will allow the window to open and closed securely.

There are a variety of types of uPVC handles. They include:

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved shape that can be useful for hard-to-reach windows.

Tilt and turn handles - these are used on tilt and turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames come with these. They are commonly referred to as 'Bay Windows' in the UK.

If your uPVC window handle is broken, it can be a major hassle. There is no need to change the entire uPVC window because of a broken window handle. There are a few simple steps you can follow to repair or replace a damaged uPVC handle.

By identifying the kind of window you have, calculating the spindle length and purchasing an appropriate handle, you can repair your broken window handle. It is crucial to be patient and prioritize security when working with windows and tools but this is a relatively simple task. It can be the difference between having a secure and safe home or a unsecured easily opened window! Bridgewater Glass is the place to go if you're in need of help or would like to speak to an expert about replacing your window handle. We have a group of experienced and knowledgeable experts who can help with any issues you may be facing.