클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Almost all customers agree that these upvc replacement window handles are simple to install and feel like good quality. It is important to be aware that the handle you select for your window should be suitable for the window.

The height of the step is the most important aspect. This is the distance between the handle and the frame, or base. Other considerations include lockable styles and mechanisms.

Replacement parts

You can purchase a range of replacement handles made of upvc. They are available in a variety of styles and colors so there is sure to be something that will fit your windows. It's easy to impulse buy especially if the handle breaks so it's best to be patient and examine certain things prior to committing to purchasing a new one. The first thing to consider is the type of upvc handle you currently have and what the difference between the kinds is. The table below lists the most common handles so that you can find the right one to match your window.

Espag handles are the most commonly used and are used on the majority of modern double glazed windows. They are usually attached to the frame with two screws that screw into the frame from both sides, above and below.

The spindle bar at the back could be of different sizes, and will determine whether they are left-handed or right-handed. It's important to take the measurements of the handle you have to ensure that you order the appropriate replacement.

Usually fixed with two bolts, similar to the Espag handle, they have a lower projection from the frame which means that the handle won't poke through your blinds. This is an ideal choice for blinds on your windows made of upvc and you want to make sure the handle will blend with them.

Cockspur handles resemble Espag handles, but they have a nose that closes over a wedge which rests on the frame of the window. This type of handle is commonly found on older upvc windows and also on some wooden windows.

On casement windows tilt and turn handles can be operated by either turning the handle or pressing the top of the window seal replacement. The window is opened from the inside, allowing you to clean the outside without having to go out onto a ladder or walk over the garden fence. They're ideal for those who have limited mobility, and can improve security and access in the home.

Tips and hints

Many people will need to replace their uPVC window handles at some moment. If this happens it's a good idea to be aware of a few tricks and tips that can help the job go as smoothly as possible.

The first thing to do is check what type of handle you have at home. Depending on the kind of handle and the locking mechanism, it may be necessary to replace the lock and handle. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll need to replace them along with the handle.

Thankfully, the majority of uPVC handles are identical and follow industry standard sizes, making replacing them a relatively simple process. First, remove the screw covers on the handles. These are usually pozidrive screws. Once they are removed, you are able to remove the handle.

It's a great idea to note how much the spindle protrudes from the base of your handle when you separate it. This will enable you to measure the length of the spindle to determine a replacement handle. Simply measure the amount that the square peg extends from the bottom of the handle.

This is particularly important for upvc replacement window handles inline uPVC handles for windows, since they are always straight and will only open to the left or right. They aren't able to function in the middle. It is a good idea if you're not sure of the type of handle you have at your home, to borrow a handle to see how it works.

Another great tip for working out what handed the uPVC window handle is is to simply look at how the handle rotates when operating. Handles can be rotated clockwise or counter-clockwise. If you are unsure you are, ask someone else to open the window using the handle and see how it works.

Take a measurement of the spindle

The selection of the right replacement handle for your windows could be a challenge as not all handles are the same size. The spindle is the mechanism that locks the window. It is crucial to ensure that when installing a new handle it is measured to the spindle length accurately to ensure it fits. There are a variety of types of uPVC window handles, and Upvc replacement window handles they operate in different ways so it is essential that you know what type of handle you have as well as the type of locking system that you are using.

The spindle of the espag handle extends out from the handle's rear and is connected to the lock gearbox in the window frame. When you turn the handle this turns the lock inside the gearbox, and opens the window. They are installed on uPVC windows with casement. They can be locked using keys to provide additional security.

Cockspur handles have an "nose" which closes over an elongated striker block that is placed on the frame. They are commonly found on older double-glazed uPVC windows. They are also simple and can be locked with keys. These handles are somewhat more difficult to find replacements for since they are not as common as the espagnolette handle.

If you have a tilt-and-turn uPVC, you will need a replacement handle with an alternative locking system. The handle will tilt the window, and allow it to be rotated back and forth to fully open it. You should select the handle with a spindle that is at least 55mm to be able to reach the window frame.

The same method can be used to remove and replace the uPVC handle. However, you will have to be careful when unscrewing it. It is possible to open the window more than normal to reach both screws that hold it to the frame. Once you have fitted your new uPVC handle and checked that it is in the proper position, you can tighten the screws, and test the lock to confirm that it is working properly.

Replace the handle with the new one.

Once you have the correct replacement handle, it will simply screw into the correct position. It will require a screwdriver and an electric one could be a lot easier. When screwing the screws in, it is important not to over tighten the screws because this can cause the handle to break or warp.

Inserting the spindle is the next important step in installing the new handle. The spindle is the component which runs through the handle to control the locking mechanism of the window. It is essential that the component is properly fitted to permit the window to open and closed securely.

There are a variety of different kinds of uPVC window handles. There are various kinds of window handles made of uPVC.

Espagnolette Handles are handles inline that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curvaceous shape that is useful for difficult-to-reach windows.

Tilt and turn handles - these are used on tilt and turn windows to control the opening and closing mechanisms.

The majority of uPVC window frames are equipped with these. In the UK they are often known as "Bay Windows".

It can be a hassle when your uPVC handle breaks. There is no need to change the entire uPVC window because of a damaged window handle. There are a few easy steps you can take to fix or replace a broken uPVC handle.

You can repair your broken window handle quickly by identifying the type and measuring the spindle. When working with windows and tools, it is important to consider safety first. However this is a fairly easy task. It could mean the difference between having a secure and secure home or a window that is easily opened. If you have any concerns or want to talk to a professional about replacing your window handle, contact Bridgewater Glass. We have a group of experienced and knowledgeable experts who can assist with any issues you might be experiencing.