클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers to aid the new pane in being able to fit properly into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may think about the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, Repairs to uPVC Windows you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can be due to the handle mechanism wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking might need to be removed before a new layer can be applied. When it is time to uPVC repair, you should avoid over-caulking. This will make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. This can be easily repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze it could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple procedure, but it is simpler when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to offer assistance.

It is also crucial to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges may also become misaligned due to wear, Repairs to uPVC Windows causing an opening where the sash and frame meet. If they are beyond repair, it could be required to realign them. The interlock, which is located on the hinge side of the window repairman near me, may be misaligned. Again, it's possible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and there may come the point when it's more economical to replace them than fix them. So, if you're having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.