클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Guard your precious possessions from car thieves by putting in a ghost immobiliser. Our TASSA-certified system is safe from hacking, key cloning, and bypassing the vehicle immobiliser.

The system is hidden within the wiring loom in your vehicle and is inaccessible to anyone looking. It is operated by generating pin code push sequences that are activated by existing buttons on the steering wheel, door cards, and the centre console.

No circuit cuts

A car is a prized item that takes hours of work to get, which is why owners want to safeguard their car from theft. Traditional security devices, like alarms or wheel locks can be easily bypassed by thieves. A ghost immobiliser is a extremely effective solution that works in a quiet manner and isn't easily identified by modern thieves.

Ghost immobilisers or a hidden device is a device that communicates to the data network of your vehicle's CAN to disable the engine. It does this without using key fobs or radio frequencies. It communicates with your vehicle's ECU via buttons already on the steering wheel, dash and door panels to create a unique pin code that you only can access. The code can be altered at any time and can contain up to 20 digits based on your preferences. It also comes with a safe emergency code you can use if you forget your PIN.

The ghost immobiliser can also be used to block relay boxes from transferring the signal of your car's key from inside your home, autowatch ghost Immobiliser fitting which would unlock the doors and start the vehicle. It can also block advanced methods of stealing your vehicle, like OBD port hacking. The device is tiny, weatherproof and difficult to spot. It's also difficult to hack.

The ghost immobiliser comes with a further benefit: it can be installed in your vehicle without leaving permanent marks. It is ideal for people who plan to sell their car in the near future. It's also faster and more simple to install compared to a factory-fitted unit.

The Autowatch Ghost, a cutting-edge technology, is a new generation device that prevents contactless car thefts by connecting to the CAN network of a vehicle and using the buttons to generate a unique PIN code. This is a hidden device that can be set up without severing any wires and requires no additional key fobs. It can also be connected to the vehicle's original ECU to prevent thieves from gaining access to it using a new key or replacing the ECU with an "relay". This system is TASSA verified and can be linked to an International Security Register, allowing owners confidence that their vehicles are safe from theft.

No RF scanning

If you've invested an enormous amount of time and money into the customisation of your vehicle, you'll want to protect it from theft. Installing an immobiliser is among the most effective ways to avoid theft. It will stop your vehicle from beginning until you enter an individual code. You can create a 20-digit PIN using the buttons on your dashboard and steering wheel. This will ensure that only you have the right to drive your vehicle. You can also set up a valet or service mode that allows you to temporarily start your car without entering the PIN code. This will allow technicians to work on your vehicle without being present. This feature is great for people who want to reduce time and make their lives easier.

Ghost immobilisers, a new generation device, connects to the CAN data network of your vehicle and uses buttons on the dashboard as well as the steering wheel to set a PIN number. It is designed to be discreet, with no indicators or sounds to make it obvious and can be placed anywhere on the vehicle without disturbing the aesthetics of your prized possession.

This stealthy device is approved by TASSA and can lower the cost of insurance. It also comes with a tracking function that allows you to locate your vehicle even if it has been stolen. This is especially useful when you own a unique expensive car that you've spent time and effort to customize.

The autowatch ghost immobiliser fitting (visit my webpage) Ghost can be used in conjunction with an iPhone app to enable you to remotely start your vehicle in the event you forgot your PIN or not able to enter the vehicle due to some reason. This feature is great when you need to run errands or pick up your children but don't want to risk having someone else drive your vehicle. This feature is useful if you have to take your vehicle in for repair or service.

Another benefit of the Ghost is that it does not transmit or detect radio frequency signals, making it unnoticeable to thieves using RF scanning or code grabbing technology. It can also protect your car against key copying and ECU swapping which are the most the most common methods used to steal cars.

No key cloning

Ghost immobilisers are a great option to protect high-end vehicles. They are designed to stop key replication. They prevent your car from starting until an additional PIN code is entered alongside the standard key fob. This makes it very difficult for thieves to steal your vehicle, and could discourage them from trying. This is a particularly good idea if you have invested an enormous amount of time and money personalising your vehicle or own a unique or expensive model.

These immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden, which means there is no visible indication of its presence inside the vehicle. It is also impossible for a thief to identify the device using radio frequency scanning or code grabbing technology. This means that a thief must spend a lot more time in order to successfully take your vehicle.

To get around the system, a thief must be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as often as needed. The pin code is simple for you to remember but mathematically unattainable for someone else to figure out. In addition the engineer will provide you with an emergency pin code to override if you ever forget the pin.

The Ghost CAN Bus immobiliser can be easily installed anywhere on your vehicle. It works with all vehicles and can be completely customized to match your car's style. It is also easy to use and cost-effective. The device can be moved to a different vehicle, provided that it is compatible with the new vehicle.

The immobiliser on the CAN bus is compatible with a variety of other security features. For instance, it could detect the damage to your vehicle and warn the owner. It can also shut off the engine in the event that the vehicle has been tampered with. The system also protects your vehicle from key cloning and hacking. It also detects vibrations or contact with the vehicle. Additionally, it will notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief getting into your vehicle to disable the alarm, disable your key fob and create new keys. This technology is a significant improvement on traditional methods that have been employed by thieves in the past to steal your car. The CAN data network also ensures that the system won't be affected by disconnecting or changing your battery.

The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking, and replica car theft. It does not utilize LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require a large amount of wiring or are built into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be detected by diagnostic tools of a professional. It can be put in on vehicles equipped with anti-theft systems.

Another benefit of a ghost immobiliser near me immobiliser is that your vehicle can only be started by someone who has the PIN code and has physical access to your car. This is a significant advantage over traditional security systems which can be bypassed by simple modification of cables or a screwdriver.

You can easily reset your PIN if you forget it using the emergency PIN reset feature on your mobile or computer. This is useful if you need to start your car after leaving it in a garage or with the help of a valet parking service.

The Autowatch Ghost 2 is the most recent version of the product and is insurance approved by TASSA when installed by one of our authorised installers. It comes with a QR fingerprint system to identify individual parts that allows for the return of stolen items if they are found. It can also be set to'service mode,' which allows the engine to start when your vehicle is in a garage, or with valet parking, however, you must enter your PIN code again to exit the vehicle.