클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

It is essential to be cautious when fixing your windows. The first step is to put on a pair of safety goggles and gloves that are cut-resistant to stop glass shards from cutting you as you work.

Placing a plastic cover over the crack is a simple fix for a cracked window repair. This will prevent snow, rain and insects out of your home.

Cracked Glass

Broken windows not only make your home less attractive, but it can let drafts and other elements into the house. It doesn't matter if the cracks are caused by an impact, such as soccer or a baseball or a stress like the sudden temperature change, but it is essential to have them fixed as quickly as possible to avoid further damage and to ensure that your windows are functioning correctly.

Use clear tape to cover your damaged window, even if it's not damaged. This is a simple, inexpensive solution to shield your window from water, dust, bugs, and other debris. It also shields your windows from the elements.

However, if the crack is extensive or lock is getting worse, it's best to consult a professional. An experienced glazier can determine the cause of the crack and recommend an appropriate repair method.

Impact cracks are the most frequent window cracks. They usually occur when a hard object is thrown at your window with enough force that it breaks. The cracks are usually with a starburst-like pattern of lines and broken pieces that can be risky if they break loose. This crack can compromise the gas in the panes of the double-pane window and lower its energy efficiency.

Stress cracks are another kind of crack that develops because of extreme temperature fluctuations and other environmental factors. The cracks start around the edge of your window, and can eventually grow into full-blown cracks.

A more serious but feasible crack is a pressure crack. It is typically a curvy line that extends across one or more sides of the window. It could be the result of low or high air pressure that can cause expansion or contraction of the glass.

There are other products that can be used to repair cracks in window glass if you're willing go beyond tape and nail varnish. Glass Repair Film, while more expensive it will give your windows more protection and durability. If you'd rather take the DIY route epoxy is a durable adhesive that can fill in cracks to help stop further damage and make your window look like it did not have cracks in the first place!

Leaking Windows

If you notice a damp zone under your window, or the wood around it is soft or rotting it could be time to repair your windows. The excess moisture can create the perfect environment for mold and mildew which can lead to a myriad of problems for your home. They can reduce the quality of indoor air, lead to sagging of drywall and worsen allergy symptoms. Unchecked, they may also cause structural damage to your house.

If the water is coming from the outside or is visible through the frame it's a good idea to get a professional to help you with the repairs right away. Do not ignore windows that are leaking. They're a major cause of mold and structural damage.

In many cases, a simple layer of caulking is all you need to stop leaks. You'll need to thoroughly clean the area first however, and then take off any caulking that is old before applying new caulking.

You'll also need to check the weep holes on the frame to make sure they're not blocked by debris. They're designed to drain excess rainwater, but they could get blocked by insect carcasses and other debris as time passes.

Check the seal between your double-paned windows and lock the metal frame. This will help maintain an airtight seal between the glass panes, and will make the windows more efficient. As time passes the seal will be worn out and allow water to enter your home.

Another sign of leaks is the appearance of water stains on the ceiling and walls. The drywall becomes discolored when it is saturated by water. Peeling paint is another indication of water altering the adhesive properties of the paint and pulling it away from the wall.

Faux Muntins & Mullions

In the past, mullions and muntins (or glazing bars in the UK) separated and held glass panes in classic multi-pane windows. After WWII larger expanses of tempered glass were available. They're mostly used as decorative elements in some older homes.

The effects of rain or wind can harm the support of a single piece or small group of them, creating cracks in the window. You can repair the majority of these brittle or decaying parts.

First, use a rag to clean the affected areas. Use ammonia-based cleaning products that does not leave traces. Remove any rotting or loose components and use an exacta-knife cut the intersections between the vertical and horizontal painted window muntins. After you've cut the intersections, tape off the lower part of the window frame with painter's tape. Apply a thick layer of white paint to the areas you lightly painted in the first pass. Let the paint dry completely before taking off the tape and applying another coat.

If the problem is more serious like an hourglass-shaped crack in middle of the window, it's recommended to replace the sash. In these situations, it's important to find the right replacement window that matches both the style and size of the present one.

Installing a grid window is a cheaper alternative. These windows come with a complete pane of glass with the muntins being glued to the surface, giving them a divided look. These windows are not as energy-efficient as traditional ones.

If you're looking for an easy method to modernize your windows, consider installing an additional drip cap to stop water from getting into the window frame. Home centers typically sell these aluminum drip cap options for around $20. They're much easier to install than windowsash replacements, and they'll provide you with the same function as a genuine muntin or mullion.

Broken Sashes & Frames

A damaged window sash is an obvious sign that it's time to seek assistance. If not taken care of, a broken sash can cause water leaks, wood rot and more serious problems with the frame and sill. If you've broken a sash you should replace it as soon as possible to ensure that your window is properly sealed and functioning.

Often, the problem is caused by worn or improperly installed sash cords. It's easy to replace these cords on most double-hung window models. To begin, you'll need remove the tabs made of metal that keep the sash in place. Then, push up on the other side of the sash (it doesn't really matter which side) and then pull towards the opposite side to take it off. You'll need to remove the parting strip that is what separates the sash from other side so that you can get to the location where the sash cords reside.

After you've removed the sash, you must take the time to examine its metal tabs against the ones on the new sash. If they're different, it will be hard to put the new one in its slot and affect how the sash operates. Fortunately, this issue can be corrected by simply placing tabs in the correct locations on your new window.

You'll have to examine the frame of your window, too to look for any signs of damage or rot. This is a good thing to do on a regular basis, as wood will shrink and break down as time passes. If you find any visible damage it should be repaired as soon as possible to prevent an even bigger issue from arising.

If your window frames have begun to deteriorate they can be treated using a homemade preserver made from half mineral spirits and boiling Linseed. After the treatment has dried, you can refinish your frames with the finest latex paint. A fresh coat of paint will also shield your window from the elements.