클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving your vehicle with the original keys. Our most recent immobiliser connects to the CAN data network of your vehicle and a unique PIN must be entered in order to start the engine.

Unlike trackers Ghost does not transmit any radio frequency signals & can't be detected using diagnostics tools. It also has no indicators in the form of LEDs or buttons that give the impression of its presence in your van or car.

Anti-key cloning

The ghost immobiliser has been created to fight key cloning and hacking. This device connects to the CAN data network of your vehicle and generates an unique pin code push sequence by using the factory buttons on your dashboard and the steering wheel. This will stop the thief from being able to start your car. If the incorrect PIN code is entered, your car will not be started and it will be impossible for them to escape with your pride and joy.

Ghost immobilisers use new technology that is very difficult for thieves to defeat. The ghost immobiliser unlike physical deterrents, such as wheel locks and steering locks that can be cut, is a discreet electronic device. It's not even recognized by thieves as it doesn't emit radio signals and operates silently.

This next-generation immobiliser can protect your vehicle from a range of threats, such as key-hacking relay attacks, key hacking and duplicate copies. It can also stop a thief adding a key or replacing your ECU as it won't allow them to start the vehicle without entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 does not require a key fobs or remotes to operate. It is able to be deactivated from the driver's phone with a simple application. This is perfect for the time you have to give your car to valet parking or maintenance without key fobs.

The Autowatch Ghost-II is the latest version of our groundbreaking ghost immobiliser fitting near me immobiliser. It was designed to be simple and easy to use, while still being as secure as possible. This is achieved by connecting the Ghost-II with the vehicle's CAN data network, which means there are no extra wires that are able to be hidden or easily spotted. It also comes with an inbuilt feature that allows you to disarm the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the most recent method employed by professional car thieves. Thieves are able to access your vehicle's OBD with an laptop, mobile app, and some cables that can be bought online for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they want from resetting fault codes and Ghost immobiliser 2 tuning your vehicle to stealing your pride and joy in under a minute.

If you have a Ghost immobiliser fitted it can stop your car being stolen using this method by needing a unique PIN sequence is entered into your key fob in order to start the engine and drive away. It does this by communicating with the vehicles ECU (Engine Control Unit) on the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It also includes a Service/Valet mode that allows your vehicle to be started without the need for a PIN code.

To utilize an OBD hacking device, you'll require an operating system that is capable of interpreting the OBD protocol. These is available for less than PS100 on eBay or Amazon. You will also require a cable that has OBD pins that are connected to the CAN Bus. These cables can be purchased on eBay or Amazon for PS50. Then, you need to splice the cable into the wiring harness of your vehicle for example, in the radio wiring harness.

Once the hacker has established a connection to your vehicles OBD port, they can send diagnostics requests to the system at a high baud rate that can crash the CAN, and prevent systems within your car from functioning. This could cause the engine to stop and doors to lock, or even the brakes to be engaged.

No additional remotes or key fobs required.

An immobiliser for your car is a fantastic piece of anti-theft technology that is used by billions of modern cars all over the world. An aftermarket immobiliser protects your vehicle by using engine ECU software that blocks cars from starting when the transponder is false.

However, it is easy for a thief to bypass an immobiliser system in the event that they have access the code to deactivate it. The battery inside most key fobs can be removed by prying it open and a burglar can use a simple tool to take out the immobiliser's circuit board and replace it with a blank. Then, they will be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser connects to the engine ECU (Engine Control Unit) via a discrete quiet CAN data circuit that is unnoticeable with diagnostic tools such as the ones used by high-tech thieves. It does not have a traditional keyfob with LED indicators, so it is invisible.

You may have to turn off Autowatch's Ghost 2 automatic protection at certain times like during valet parking or during a service. The ghost CAN immobiliser has a special mode for Ghost immobiliser 2 this, called "Service Mode which can be activated with a push of the button on your smartphone. The car can still be operated, but the maximum speed is restricted to 36mph for greater security.

Contact us today to set up a demonstration at our workshop. A member of our team will run through the entire process of the system's operation and will provide you with owner's manuals, installation certificates, Ghost 2 emergency card and security assurance.

Simple Change of PIN Code

Ghost is the latest generation of device that protects your car without cutting wires or installing key fobs from an aftermarket. It connects directly to your vehicle's CAN data network and a personalised PIN code is programmed into it by pressing buttons on your steering wheel & dash. The device does not emit RF signals, which means it is not able to be tampered with. This makes it difficult to be detected by sophisticated scanning and RF technologies used by modern thieves.

The PIN code sequence can be altered whenever you wish to lock out prior drivers, and it even has an override code in the event of forgotten sequences. During installation the installer will show how to do this. The system also comes with the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your mechanic or garage can fix the car without needing to know the pin code. This is a great option for those who don't want their PIN sequence to be disclosed, but would like to leave their vehicle with valet parking or service.

ghost 2 immobiliser fitting near me is an unobtrusive system that utilizes the buttons on your car to create an individual and interchangeable PIN sequence. This sequence is entered through the smartphone app. There are no additional LED indicators are thrown, and your car is protected without possibility of being disabled.

Tested for every vehicle

Contrary to key fobs which require you to press buttons on them the ghost immobiliser is hidden under your steering wheel or dash so that you don't even know that it's there. The device is connected to your car's CAN data networks and the personalised PIN code is inserted using buttons that are already present on your car. The system won't allow your car to start until this code is entered. This means that thieves are unable to duplicate your keys or access the OBD port to hack into your vehicle.

Ghost is a feature that can be found in all vehicles, including electric cars, vans motorhomes and bicycles. It is also extremely versatile and can be set to disable under different circumstances. It is possible to program it to enter Valet mode, for example when the vehicle is transported to a valet company or parking company. This permits you to drive within the 30mph limit, and the ghost immobiliser will turn on itself when your vehicle returns to your home.

The device can also be reset at any time using your personal PIN code. This is useful in the event that you forget your code or the device becomes inoperable, meaning that it's effectively like new.

It's also important to note that the device is completely undetectable to anyone who isn't familiar with it. It works by running through existing buttons on the dashboard of your car and on the steering wheel, and utilizes the information they send to recognise the buttons that have been pressed. This makes it a safe and solid security system that is not able to be altered by RF scanning, jamming, or even a door lock pick set.