클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and help keep their homes warm. Window replacement is often required in the event of serious damage, such as broken glass or a shattered window frame.

Many other issues can be solved to prolong the longevity of windows. Common problems include:

Broken or cracked panes

Whether it's an errant rock being tossed by your lawnmowers, or a tree branch blown by strong winds, cracked window glass is not only visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air to enter your home. Luckily, it's usually relatively simple to repair windows with broken panes.

Start by carefully removing the glass with gloves and safety glasses. You may need use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is water-proof to the frame's perimeter. This will stop water from entering through the crack, which could cause further damage to both the frame and the glass.

If you have double-pane glass, cracks that are severe could damage the gas layer that lies between the panes and make your windows less insulative. If the crack is severe enough to cause damage to the integrity of the glass or if you have an inner pane completely missing, it might be time to call in an expert.

Cracks caused by thermal stress can occur when there's a drastic difference in temperature inside and outside your home. The glass is then able to expand and contract. If the cracks are located on two sides of a window, it is recommended to replace it rather than try to repair it.

Clear tape can be used to fill cracks in windows that aren't yet ready for replacement. It will also keep out cold and bugs. You can also cut the length of a nylon stocking to cover the entire crack and glue it with duct tape. This isn't an end-to-end solution, but it's a good way to keep insects out and cold air away from your home. If you notice cracks on the windows of your old ones it is recommended to contact your local business to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is a frequent issue with windows. It can ruin a house's appearance and pose a safety risk. It is, however, possible to fix rotted wood. First, you will need to ensure that the cause of the rot has been taken care of. Check for roof leaks and other places where water can enter the wood.

The next step is to take off the rotten parts of the Window repair frame. This can be done with an axe, a claw hammer, or rasp. After removing the decayed wood, you'll need to replace it with fresh wood. It is recommended that you choose treated wood for this task as it will be resistant to rot. If you are not able to replace the wood that has been damaged, you can try using wood hardener or filler to help strengthen the damaged area. This kind of product will be found in a lot of hardware stores. To get the best results, adhere to the instructions on the product label.

Once you have replaced the decayed areas of the windowsill, it's essential to protect the newly-repaired area. This can be done by applying an water-resistant wood sealant. A product like Sikkens is an excellent option for this task.

You can also use an epoxy filler that is two-part to shield the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. However, it's important to follow the directions for application on the label. After the epoxy filler dries, you can sand down the wood's surface. It is best to start with a rough layer of sandpaper, and then progress to a smoother one.

The final thing you want to do is make the area that is rotting even more by expose it to more water. Therefore, it is recommended to cover the repaired area with an oil-based primer that will protect it from moisture. Then, you can reapply waterproof wood sealant.

The website won't work

There are many reasons why windows don't open. The house could have settled or the wooden frames could have warped during rainy weather. Somebody may have secured them with a nail for security. With a little patience and the right tools, you can open the majority of stuck windows.

Gunk or debris that has accumulated could be the main cause of the window not opening. The buildup of dirt and grime on sliding tracks, hinges and locks over time, window repair notes Acme Glass. In addition, metal hardware may be rusty when it comes in contact with humidity or direct sunlight. Keeping these areas lubricated with spray grease will help prevent oxidation and keep your window working correctly.

The pulleys used to raise or lower the window could become loose, or break. The components may be weakened and obstructed if they are located two or more floors higher than the ground.

If you have difficulty opening a door, use a pry-bar to gently open the door. Put a piece of wood on the frame to give your pry bar more leverage, and be sure not to harm the window or the wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the reason for windows that don't lift or lower. Based on the manufacturer of the windows, you'll have to consult your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they cannot open, it's time to replace them. Homespire Windows & Doors provides windows that are energy efficient. Don't let the windows in your home become functional to useless. A window that isn’t properly shut can expose your home to burglary and water damages. Contact us today to learn more about our replacement windows as well as our services!