클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and keep their homes warm. In the event of severe damage, such as broken glass or a cracked frame, a replacement window may be required.

Many other issues can be solved to prolong the lifespan of windows. Common issues include:

Broken or cracked panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree's branch blown by high winds, cracked windows are not just unattractive but can lead to higher electricity bills as the broken pieces allow cold air to enter your home. It's fairly easy to fix windows with broken panes.

Begin by carefully removing the glass with gloves and safety sunglasses. You may need use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the wood of the frame using a soft cloth or Window repair paper towel.

After cleaning the area, apply silicone caulking that is waterproof around the frame's perimeter. This will stop water from getting into the crack, which can cause further damage to both the frame and the glass.

If you have double-pane glass, cracks that are not treated properly could weaken the gas layer between the panes and make your windows less insulative. If the crack is severe enough to cause damage to the quality of the glass or if you have an inner pane completely missing, it's the time to call a professional.

Cracks caused by thermal stress can occur when there's a significant difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If the cracks are on two sides of a glass, it is best to replace it instead of try to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready for replacement. It will also keep out cold and bugs. You can also cut the length of a nylon stocking to completely cover the crack and then glue it to the surface with duct tape. This is not an end-to-end solution, but it can keep insects and cold air away from your home. If you notice cracks or blemishes on the windows of your old ones, you should check with the local company to determine whether replacing the entire window is a better option.

Rotten Wood

Wood rot is a common issue with windows. It can ruin a house's appearance and create a safety risk. It is, however, possible to repair wood that has rot. It is first necessary to address the cause of the wood's rot. This can be done by examining for leaks in the roof and gutters that aren't functioning, cracked caulking and any other areas which allow water to penetrate the wood.

The next step is to get rid of any rotten areas of the window frame. This can be done with either a chisel, a rasp or claw hammer. Once the rotten areas have been removed, you will need to replace them with fresh wood. It is recommended to use pre-treated wood for this task as it will be resistant to decay. If you are unable to replace the wood damaged by rot then you can use wood hardener or filler to strengthen the damaged area. This kind of product can be found in a lot of hardware stores. Follow the directions on the label of the product to ensure the best results.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant to the wood. Sikkens, for example is a fantastic product to use.

Use a two-part epoxy to protect the wood against further damage. This product is easy to apply and leaves a nice finish. However, it is very important to adhere to the instructions for application on the label. After the epoxy filler dries it is possible to sand the surface of the wooden. Start with a rough sandpaper, and then move on to more smoother grades.

The final thing you would like to do is make the area that is rotting even more by expose it to more water. Therefore, it is recommended to cover the area that has been repaired with an oil-based primer that will help protect it from moisture. After that, you can apply waterproof wood sealant.

It won't open

A window repair that won't open could be due to many reasons. Wood frames can warp when exposed to wet weather, the house may have settled or someone may have nailed it shut to protect themselves. However, with a little patience and the right tools, many windows that are stuck can be opened.

One of the most common causes of windows that won't open is accumulated debris or gunk on its moving parts. Dirt and grime build up on the sliding tracks, hinges, and locks over time, says Acme Glass. Metal hardware can also rust if it comes into contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent oxidation and keep your window operating properly.

Stuck windows may also be the result of a loosening or breakage of the pulleys that are used to lift and lower the window. These components can lose tension and cause obstruction when they are situated two or more floors above surface.

If you're having trouble opening a window, try using a pry bar to gently force the window repair near me open a little at one time. Put a piece of wood on the frame to give your pry bar more leverage. Also, be careful not to damage the window or wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the cause of a window that won't raise or lower. Depending on who manufactured your windows, you'll need to refer to the owner's manual for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they aren't opening, it's probably time to replace the windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let windows in your home go from being functional to inoperable. If your windows aren't properly closed could make your home vulnerable to burglary and water damages. Contact our team today for more information on our replacement windows and our services!