클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's How to open car Your Car Without Damage

If you've locked your keys inside your vehicle, don't worry. There are numerous techniques you can try prior to calling a locksmith or roadside assistance service.

For example, you can make use of a shoelace that has a slip knot to tie up an old post lock or a wire coat hanger that you untwist and mold into a hook. You can also use an inflatable wedge or a door wedge.

Pump Wedge

Call a professional if you are stuck in your car and DIY techniques like shoestrings, wedges or wire hooks do not work. A locksmith or repo service provider could have lockout tools that can allow you to unlock your car without damaging it.

If they do, be sure you are using them correctly. The most important thing is to know where to place the wedge tool. Many people make the mistake of placing the wedge on the top corner of the door, where it is the most susceptible to damage. This is a bad idea as you're more likely to harm the weather stripping as well as the wires within the door. The wedge should be placed where you can see the largest gap and where the highest leverage is.

The Pump Wedge is a premium inflatable wedge made of heavy duty non-marring vinyl. It slides between the door of your vehicle lock out service and the door frame, and is then inflated to create a separation which allows you to slide in other tools like an extended reach car opening tool rod. It has a hook at one end that you could form to grasp the latch on the door handle.

This can be done with a pair wooden door stops. They can be placed in the rear of the door to pry the gap wide enough for rods. You can also make use of a slim-Jim, a thin strip of metal that is bent into a hook and used to secure the lock. This method is not for the faint-hearted as you must be careful not damage the weather stripping that is on your door.

Another alternative is to use a shoelace however this is only suitable for older vehicles that do not have a push-button unlocking mechanism. You can tie knots in the middle and move the lace upwards and downwards along the door seam until you locate the latch. Then, you can move the lace until it hooks the lock, tighten the slip knot and pull it upwards. This method is more difficult than other ones, and it may scratch paint or damage the door trim if you aren't vigilant.

Inflatable Wedge

If you have a wedge-shaped inflatable car door opener, you'll be able to easily unlock your vehicle without the need for prying or slim jim tools. These wedges can be put between the window and frame of the car. They when they are inflated, they provide a wide space to place a tool with a long reach, like a button grabber or slim jim. This method is less dangerous than using prying tools and is suitable when you do not have an screwdriver.

A coat hanger made of wire that is shaped into a hook is a different way to unlock a car without damaging the exterior or interior. This can be used to secure the lock and may be more effective than a flat screwdriver because it is less likely cause damage to the paint of the car. However, it is important to inspect all the doors to ensure there is no other way to gain access.

You could also try a plastic bag that has been bent into a noose-like or v-shaped shape, but you will need to be cautious not to tear it because it could make your situation more difficult. This method is particularly useful if you can't find the lock button. This method isn't as reliable as a wedge or metal coat hanger, but it could help you in the event of a crisis.

Stay at peace and always put safety first. There are a variety of ways to resolve this type of issue, and if you study this article, you'll be prepared for any situation that comes your way. If you follow the steps we have provided, you will be capable of unlocking your car and go going without any unnecessary damage or stress. If you can, always be sure to bring your keys when leaving your vehicle.

Shoelace

It's one of the "oh crap!" moments that can ruin a day. In a pinch, it's best to keep a few items on hand that can help you unlock your vehicle without breaking the windows. Certain of these items are easily accessible and will save you money on locksmiths, or the time it takes for roadside assistance.

A shoelace, or twine, is an excellent tool for unlocking a car. It is easy to use and works on numerous automobiles. This method only works for cars with post locks. They are stacked vertically on the window sill and are easily accessible from the outside of the car. Use a shoelace and an elongated slip knot to accomplish the task. Then, wiggle the shoelace through the crack between the door and window frame. Once the slip knot has been put in place, pull the two ends of the string upwards to lasso it.

This technique may only work on older models that have an open lock with a hook. If you have a screwdriver in your possession to use, you can use it to unlock the door more forcefully. You can also use a pole that you can pull from a nearby item, such as the door frame, or a piece of wood, to put into the window frame. This will allow space for an object to push the lock's interior button.

Although the methods above might be relatively safe for many drivers, it is best to get assistance if you are able to. This will help prevent further damage to the car and reduce the risk of a crash due to stress. If you do not have a phone with a mobile number or cannot call for help it is essential to inform trusted family members and acquaintances know where the vehicle is parked. Additionally, a spare set of keys can be kept in a easily accessible spot on the vehicle, so you can get them back if needed.

Wire Hanger

It can be a stressful experience to lock your keys in your car. However, the trick is to stay calm and think through what options you have for retrieving them. This will help you avoid aggravating the situation, which is something that can occur when you panic.

You can also use a modified wire hanger to get into your car. You'll have to unravel the wire coat hanger to create a straight edge with a hook you can use to move your lock rod. Once you can reach the rod that locks your door and you are able to pull it up and allow you to open the door.

Another option you could consider is to use a rod or even an element of metal from the body of your car. It is important that you make sure you don't cause any damage to the vehicle in this procedure and it is ideal to do it without removing the car apart. This method will work better on older cars than on newer models. However it can be utilized on models with unique outer door handles.

You can perform similar things using the use of a shoestring tied into the slip knot. It can also be used on a post lock but it will be slightly more difficult to maneuver since you will be relying on the tension of the string to hold the lock. You can accomplish this by threading a shoestring into the small hole in the weatherstripping of your vehicle's doors. After the string is in you can pull it in a tight manner to form a loop that will snap around the lock, allowing you to take it off. This method can be very effective if you're lucky enough to locate the lock in the right spot.