클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers that help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc Window Repair is a long-lasting and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows to access the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could also be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the old caulking might need to be removed before a new layer of caulk can be put on. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal than the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in an ease. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's easy to change the hinges on a window but it's much easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, can become misaligned, this causes a gap to form where the sash joins the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They can help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it may be cheaper to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.