클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle from key cloning and prevents thieves from driving it with the keys you originally had. Our latest immobiliser connects to your vehicles data network via CAN and a unique PIN code must be entered for the engine to begin.

Ghost unlike trackers, doesn't emit radio frequency signals and can't be detected by diagnostic tools. Ghost does not have LED indicators or buttons that would indicate its presence in your van or car.

Anti-key cloning

The Ghost immobiliser was created to combat key cloning. This device is connected to your vehicle's data network CAN, and creates a unique pin number using the factory buttons in your dashboard and steering. This prevents the thief from being capable of starting your car. If the incorrect PIN code is entered, your car will not be started which makes it impossible for them to drive away with your pride and joy.

Ghost immobilisers are new technology that is extremely difficult for thieves to beat. Contrary to physical deterrents, such as wheel locks and steering locks that can be cut or taken The ghost immobiliser is a discrete electronic device that isn't easily detected by regular thieves, as it doesn't emit any radio signals and operates in a silent manner.

The new generation of immobiliser is able to protect your car from a myriad of threats like cloned keys, key-hacking and relay attacks. It also stops a thief adding a key or replacing your ECU because it won't permit them to start the car without first entering the correct PIN code.

The ghost immobiliser 2 unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It can be deactivated from the driver's phone by using a simple app. This makes it ideal for the times you have to give your car over to valet parking or maintenance without the key fobs.

The autowatch ghost 2 installers near me Bmw X6 Ghost Installer-II is the latest version of our groundbreaking ghost immobiliser. It is designed to be as simple and easy to use as is possible, yet remains as secure as ever. This is achieved by integrating the Ghost-II into the vehicle's data network CAN, which means that there are no wires to hide or be easily located. It also has an inbuilt feature that lets you to disarm your Ghost-II by simply connecting to the vehicle's Bluetooth which means you can enter and drive without any hassle.

OBD port hacking

OBD port hacking is the most recent method employed by professional car thieves. Thieves have access to your vehicle's OBD port with no more than a laptop, an app, and a few cables that can be bought online for less than PS50. Once they have access, they will be able to do anything they like to do, from resetting your vehicle's fault codes, tuning your vehicle, or getting it stolen in less than a minute.

It can prevent your car from being taken away by requiring a unique PIN number to be entered with your key fob before you can start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is undetectable by any scanning technology, RF or code grabbing. It even includes a Service/Valet mode that allows your vehicle to be started without needing the PIN code.

You will also need an OBD cable that has OBD pins that connect to the CAN bus. These cables are available on eBay and Amazon for around P50. You'll also require a cable with OBD pins that are connected to the CAN Bus. These cables can be purchased at Amazon or Ebay for around PS50. The cable must be connected to the wiring harness of your car, like the radio wiring harness.

Once the hacker has access to the OBD port on your vehicle, they are able to send diagnostics to the system at a high baud rate which can cause a crash to the car's CAN and stop the systems from working. This can cause the engine to stop and doors to lock, or even the brakes to engage.

No additional key fobs or remotes are required.

An immobiliser for your car is a great piece of anti theft technology used by millions of modern vehicles all over the world. Using engine ECU software to stop cars from starting if a fake transponder signal is transmitted to it, an aftermarket immobiliser is an excellent way to safeguard your vehicle.

However, it is simple for a burglar to circumvent an immobiliser system in the event that they have access the code to deactivate it. The batteries in the majority of key fobs can be removed by prying it open, so a thief can make use of a simple tool to take out the immobiliser's circuit board and replace it with the blank. Then, they'll be in a position to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is accomplished by a discrete and silent CAN data loop that is not detected by diagnostic tools like those used by high-tech thieves. It does not also use a traditional key-fob with LED indicators, which means it can go undetected at a glance.

It is possible to disable Autowatch's Ghost 2 automatic protection at certain times like during valet parking or during a service. Ghost CAN immobilisers come with a feature called "Service Mode that you can activate with a simple push of a phone button. The car is still operational however, the maximum speed is limited to 36 mph.

Contact us today to arrange an appointment for a demonstration in our workshop. A member of our team will explain how the system works, and give you your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is a new generation device that can secure your vehicle without cutting wires or installing aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personalised PIN can be programmed using buttons on the steering wheel and dash. The system blocks engine start and cannot be bypassed as there are no RF signals emitted from the device. This makes it undetectable by sophisticated RF scanning or code grabbing techniques that modern thieves employ.

The PIN code can be changed to block earlier drivers or include an override code in case you forget the sequence. The installer will guide you through how to do this during installation. The system also includes the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can fix the vehicle without needing to know the pin code. This is a great choice for customers who don't wish their pin sequence to be revealed but still would like to leave their vehicle with valet parking or service.

Ghost is an unobtrusive system that utilizes the buttons on your vehicle to create an individual and interchangeable PIN sequence. This sequence is entered using the app for smartphones, meaning that no additional LEDs are being thrown, and your vehicle is safe from the risk of being disabled by hackers or other technology.

Every vehicle is tested

A ghost immobiliser, unlike key fobs that require you to press buttons, is discreetly placed under the steering wheel or dash. Only you will know it's there. The device is connected to the vehicle's CAN data network, and a personalised PIN code is inserted using existing buttons on your vehicle. The system will then stop your engine from starting unless the code has been entered first. This means that thieves can't copy the keys to your car or access the OBD to hack into it.

Ghost can be fitted in all vehicles including electric cars, motorhomes, vans, and bikes. It's also incredibly versatile and can be programmed to shut down in various scenarios. For instance, it can be programmed to enter Valet mode when the vehicle is being taken to a valet parking or service company. This permits you to drive your vehicle within a speed limit of 30 mph and the ghost vehicle immobiliser immobiliser will turn on itself when your vehicle returns to your possession.

Another excellent feature is that the device can be reset to your personalised PIN at any time. This is great if you lose the code, or in the event that the device becomes unusable.

It's also worth noting that the device is inaccessible to those who aren't familiar with it. This is due to it running through the buttons on the dashboard of your car and on the steering wheel, and utilizes the information they send to determine the buttons that have been hit. This makes it a safe and reliable security solution that isn't affected by RF scanning, jamming or door lock pick sets.