클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement upvc window handle replacement Window Handles

Almost all replacement window handles made of upvc come with everything you need to complete the task. However, if the old handle had pins or screws holding it, these must be removed. Then, you need to remove the snap-in cover on the handle's base.

You will then need to determine what kind of window lock and handle you are replacing. This is important!

Espag

Espag handles are a system of multipoint locks that are designed to fit on casement windows like uPVC or wooden double glazing. The handle is fitted with a 7mm square shaft that fits into an uPVC gearbox. window. When the handle is turned, it activates a series locks around the perimeter of the window. Espag handles are also referred to as shootbolt handles. They provide additional security when compared to the standard single point lock that is found on older window frames.

They are available in a variety of different designs, including inline and cranked handle designs that can be used in left or right hand operation. You can also find ergonomic handles that improve the appearance and feel of your window as well as handles.

If you're planning to replace your existing uPVC window handle with an espag type handle, you'll have to determine the size of the spindle installed and measure the measurement from the base of the handle to ensure you get the right replacement. This measurement is referred to as step height and can aid you in finding the perfect uPVC handle for your home.

You may need to remove any screw covers which protect the screws that hold the handle in place, and if that's the case, use a screwdriver or pliers to break the pins that hold the handle. After removing the pins or screws that hold the spindle in place then you can remove the handle.

After removing the handle you can access the locking mechanism inside the frame of the windows and take out the cockspur block located next to the handle. This will allow the window to be opened. The replacement window locks uPVC handles you ordered will be able to slide onto the cockspur block, and then into handle spindle to allow the window to be opened again. If you want to be sure that your uPVC handles are properly secured you should replace the cockspur block a brand new one.

Cockspur

Cockspur handles are commonly found on older uPVC or aluminium windows. The handle is closed and then turns onto a wedge-shaped plastic receiver catch. (Not to be confused with timber latches which are also covered in this section.) These handles can be lockable or nonlockable. They are available in various nose heights that can be adjusted to the existing frame.

The handle is secured with small triangle-shaped spur (spur) that is attached to the frame. These are usually one-way handles, but a deadlock with a locking mechanism can be fitted to provide additional security.

Similar to Espag handles, the replacement handles for cockspur handle are easy to install, all you need is new screws (supplied) and the correct backset. The backset is the distance between the baseplate of the window to the underside of the nose of the handle. Aluminium window frames are generally 9mm wide, whereas UPVC is 21mm wide. There are a variety of different styles, so it's crucial to take measurements prior to purchasing the handle.

This kind of window handle can be substituted by simply unscrewing the existing handle and then removing the spindle, or in some cases the whole handle assembly. The replacement handle is then screwed in place using a pair pozidrivs screws. The pozidriv screws are available in either a brass or zinc finish to match the hardware, and there is the option of a self-locking version.

This cockspur handle can be simple to install and is perfect to replace or repair old uPVC Windows. They have a universal design that makes them suitable for all profiles and backsets. Each handle comes with 3 packers that vary in thickness, these are neatly fitted to the underside of the handle nose and can be arranged in various ways to create backsets of 9, 13mm, 17mm and 21mm. The handles are available in both left and right-handed versions, as well as lockable and nonlockable versions. They also come with a variety of nose heights.

Turn and tilt

Tilt and turn windows are a coveted European window design that has been used for a long time in Europe however, it is only just starting to catch on stateside. They combine the benefits of three window styles - tilt, in-swing, and pivot. They are perfect for older homes since they provide more ventilation than standard windows.

When tilt and turn windows are closed, they lock like any other fixed window. But, by turning the handle 90@ or 180@ (depending on the type of tilt and turn window) the sash can be opened upwards and the window will be tilted into allowing air to circulate through the gap at the top of the frame. This is an excellent way to let air circulate without having to open an enormous windows that could be dangerous.

The sash can be opened fully by turning the handle 90@ or 180@. This allows full air circulation, which is particularly beneficial in rooms with a lot of draft or homes where odors from smoke or other sources are likely to accumulate. It also makes cleaning the outside of the glass much simpler because it can be done from inside the home - a task that often requires precarious ladders.

Tilt and turn windows are also extremely secure. When they are locked in the closed position, they are very difficult to open from outside, and they have double seals that stop rainwater from entering the home when in the tilted in-swing position. This can be a particularly beneficial feature for older homes where burglars are more likely to target traditional windows that can be opened using the side hinges.

Spade

There are a variety of handles that can be installed on double-glazed windows made of upvc. The two most popular kinds are Espag handles and Cockspur handles, then there's also tilt and turn handles, spade or blade handles, and monkey tail handle. The type of handle you choose will depend on your preferences and the kind of windows you have.

You must know how your current handle is connected to the frame to select the appropriate replacement upvc handle. This is referred to as handing and is a crucial aspect to consider when buying online. Some handle designs don't fit all windows. Some cockspur handles, for example, are angled while others are straight, and can turn either left or right. You'll also require the spindle size which is the distance between the base of the handle and the head of the handle.

Identifying if your windows require a limiter is also crucial when selecting the appropriate handle. These are typically found in high-rise apartments or commercial buildings, but they're not required for homes that are mostly domestic. Additionally, you must think about step height, which is the distance from the bottom of the screw plate to the apex of the handle.

The word spade is derived from Old English spadu, spaedu or spada and has been translated into numerous languages, including German spaten and Low German spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. Since the time, the word has become an emblem of African American pride and heritage.

It is essential to choose the right size when replacing a handle that is Cadenza-style. The handles are available in straight and angled versions that differ by just a few millimetres. The handle head may vary between a D and a T shape, or be without handles at all.