클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement window handles are easy to install and feel like good quality. It's crucial to understand that the handle you choose for your window should be suitable for the window.

The step height is the most crucial factor. This is the distance between the handle and the frame or base. Other factors to consider are lockable mechanisms and designs.

replacement glass windows parts

There is a broad selection of replacement double glazing windows upvc window handles available for purchase. They come in many different styles and colors so there's sure to be something that fits your windows. It's easy for you to purchase a product on impulse particularly when the handle is damaged. Therefore, it is best to look over a few aspects before buying a replacement. The first thing to consider is the kind of upvc handle do you currently have and what the difference between types is. The table below lists the most commonly used handles so that you can select the best one to suit your window made of upvc.

The majority of double-glazed windows today have epag handles. They are typically attached to the frame by two screws that screw in from both sides.

They come with a spindle bar on the back, which can be a variety of sizes, and this will determine the way they operate (either left or right handed). It is important to determine the measurements of the handle you have to ensure that you order the correct replacement.

Usually, they are fixed with two bolts much like the Espag handle, but they are positioned low from the frame, which means that the arm won't poke through your blinds. This is a great option if you have blinds on your upvc windows and you want to make sure the handle will blend with them.

Cockspur handles are similar to Espag handles but they have a nose which closes over a wedge, which is placed on the window frame. This type of handle can be found on older wooden and upvc windows.

Tilt and turn handles are usually found on casement windows and can be operated either by turning the handle or pushing on the top of the window. This opens the window from the inside and allows you to clean outside without having to go to the ladder or climb over the garden fence. They also make a great option for those with limited mobility. They can be a great way to improve security and accessibility at home.

Hints and tips

Many people will need to replace their uPVC window handles at some point. It's important to have some tips and tricks that will help you make the task easier.

Find out what kind of handle is in your home. Depending on the type of handle is attached to and which locking mechanism it is using, it may be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are blocked or seizing up, you'll need to replace them along with the handle.

Thankfully, most uPVC handles are very similar and follow industry standard sizing, which makes replacing them a simple task. First, remove the screw covers on the handles. They are typically pozidrive screws. Once these are removed, you can remove the handle.

It's a great idea note how much the spindle protrudes from the base of the handle after you take it off it. This will allow you to measure the length of the spindle to determine the replacement handle. Simply measure the length the peg is sticking out of the bottom of handle.

This is particularly crucial for inline uPVC window handles as they will always be straight and will only open either left or right, and won't operate in the middle. It is a good idea if you're not sure of the kind of handle you have in your home to borrow a handle and see how it functions.

You can also determine the handiness of a uPVC window by observing how the handle spins when it is used. Handed handles can turn either clockwise or counter-clockwise. If you're not sure then ask someone to open the window using the handle and see how it works.

Measure the spindle

Choosing the correct replacement handle for your windows can be difficult as there aren't all handles that are identical in size. The spindle is the mechanism that locks the window and it is important that when you fit the new handle it is measured to the length of the spindle precisely to ensure it fits. There are a variety of types of uPVC window handles and they operate in different ways so it is vital that you know which kind of handle you are using and the type of locking system.

The spindle of the Espag handle is a part that extends from the rear of the handle, and is inserted into the lock gearbox inside the window frame. When you turn the handle, it then turns the lock in the gearbox and opens the window. They are typically used on uPVC windows with casement and can be locked using keys for extra security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They have a "nose", which closes over a wedge shaped striker block. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles since they aren't as common as the handles made of espagnolette.

If you have a tilt and turn uPVC, you will require a replacement handle with a different locking mechanism. The handle will tilt the window, and allow it to be turned back and forth in order to fully open it. You must choose a handle with a spindle that is at least 55mm in order to be able reach the window frame.

You can follow the same procedure to take off and replace this kind of uPVC handle, however you will need to be cautious when removing the old one. You may need to open the window a little larger than usual to ensure you reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the right position then tighten the screws and then check to make sure the lock is working correctly.

Replace the handle with the new one.

If you have the proper handle replacement, it's going to simply be screwed into the correct position. This will require a screwdriver, but may be easier with an electric one. It is crucial not to overtighten the screws when screwing them into. This can cause the knob or handle to warp.

Another important step to take when installing the handle is to install the spindle. It is the part that is inserted into the handle and is responsible for operating the locking mechanism within the window. It is crucial that it is fitted correctly, as it will ensure that the window can be closed and opened with confidence.

There are several different types of uPVC window handles. There are a variety of window handles made of uPVC.

Espagnolette Handles - these are inline handles that can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is ideal for windows in difficult-to-access locations.

Tilt and turn handles - These are used to operate the opening and closing mechanisms for tilt and turn windows. They also allow for the movement of windows.

These are the most commonly used and the majority of uPVC windows have them in place. In the UK they are often known as "Bay Windows".

It can be very frustrating if your uPVC handle fails. However, there is no need to replace the entire uPVC window just because of a broken handle. There are a few simple steps you can take to fix or replace a damaged uPVC handle.

By identifying the type of window you have, measuring the length of the spindle, and then purchasing the replacement handle, you can easily fix your broken window handle. When working with tools and windows it is crucial to consider safety first. But, this is a relatively simple job. It could be the difference between having a safe and secure home or a window that is easily opened. If you have any concerns or would like to speak to a specialist about replacing your window handle, call Bridgewater Glass. We have a group of experienced and knowledgeable experts who can help with any issues you might be having.