클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement window handles are simple to install and feel like high-quality. However, it is important to realize that the type of handle you choose must be right for your window.

The key factor is the step height that refers to the gap beneath the nose of the handle to the base or frame. Other considerations include locking mechanisms and styles.

Replacement parts

There is a broad selection of replacement upvc window handles available to buy. There are many designs and colors to pick from, and you're certain to find something that is compatible with the windows you have. It's easy to impulse buy especially if the handle is damaged, therefore it's a good idea to look over certain things prior to committing to buying a replacement. The first step is to be aware of the kind of upvc handles you own and what the differences are between them. The table below lists the most common handles so that you can find the right one to fit your upvc window.

Espag handles are the most common and are used on the majority of modern double-glazed windows. They are usually attached to the frame with two screws that screw into the frame from both sides, above and below.

They come with a spindle bar on the back which can be a variety of sizes. This will determine how they work (either left or right handed). This is the reason it's crucial to determine the handle size in order to make sure that you're ordering the correct replacement window glass.

Typically fixed by two bolts much like the Espag handle, but they have a low projection from the frame, which means that the arm won't poke through your blinds. This is a great option when you want the handle to blend in with your blinds and upvc windows.

Cockspur handles resemble Espag handles, but they have a nose that closes over a wedge which rests on the frame of the window. This kind of handle is commonly found on older windows made of upvc as well as some wooden windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing on the top of window. This opens the window from the inside and lets you to clean outside without needing to step to the ladder or step over the garden fence. These are ideal for those with limited mobility and improve security and access in the home.

Tips and suggestions and

There are a variety of different kinds of uPVC window handles, and a lot of people will have to replace them at some point. It's important to have some tips and tricks that will help you make the task easier.

Find out what kind of handle is located at your residence. Based on the kind of handle and the locking mechanism, it could be necessary to replace the handle and lock. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll have to replace them along with the handle.

Thankfully, most uPVC handles are similar and conform to industry standards for sizing, which makes replacing them a relatively easy process. First, take off the screws that cover the handles. They are typically pozidrive screws. Once the screws are removed you will be able to dismantle the handle.

If you've got the handle separated, it's recommended to make an inventory of how much of the spindle is protruding from the base of the handle. This will allow you to measure the length of the spindle when you are looking for a replacement handle. To do this, simply determine the length of the square peg sticking out from the top of the handle, and use it as a guide.

This is especially important for inline uPVC windows handles, as they are always straight and will only open left or right. They will not work in the middle. It's a good idea in the event that you're not certain of the kind of handle you have in your home, to borrow a handle and see how it works.

You can also determine the handiness of a uPVC window by observing how the handle rotates when it is in use. Handed handles can turn either clockwise or anti-clockwise. If you're not sure, ask someone to open the window using the handle and see how it works.

Measure the spindle

It can be difficult to pick the right replacement handle for your window as different handles do not have the same dimensions. The spindle is the part that operates the locking mechanism inside the window. It is essential that when fitting the new handle, you measure the length of the spindle precisely to ensure it fits. There are many different types of uPVC handles that function in different ways. It is important to know which type you have, and what locking mechanism you have.

The spindle on the espag handle extends from the handle's rear, and is connected to the lock gearbox in the window frame. When you turn the handle this turns the lock inside the gearbox, and opens the window. They are installed on uPVC windows with casement and can be locked using keys to increase security.

Cockspur handles have a "nose" which closes over a wedge-shaped striker block on the frame. They are usually found on older double-glazed uPVC windows. They are also simple and can be locked using keys. These handles can be slightly more difficult to find replacements for since they aren't as popular as the espagnolette handle.

If you own a tilt-and-turn uPVC then you'll require a new handle that has a different locking mechanism. This will be able to tilt the window open but also turn it back and forth to open it fully. It is essential to make sure that the handle you choose has a length at least 55mm, or it won't be able to get into the frame of the window.

You can follow the same method to remove and replace this kind of uPVC handle, however you must be cautious when you remove the old one. You may need to open the window a little wider than usual to ensure you get to both screws fixing it to the frame. Once you have fitted your new uPVC handle and ensured that it is in the correct position, you can tighten the screws and test the lock to make sure it works correctly.

Replace the handle with the new one.

Once you have the correct replacement handle, it will be easy to screw it into the appropriate position. It will require a screwdriver and an electric one might be more convenient. It is essential not to overtighten the screws while screwing them in. This could cause the knob or handle to warp.

Inserting the spindle is the second important step to attach the new handle. This is the component that is inserted into the handle and operates the locking mechanism within the window. It is vital that it is fitted correctly, as it will ensure that the window can be closed and opened with confidence.

There are a myriad of different kinds of uPVC handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt windows seal Replacement and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle but have a curvaceous design that is ideal for windows in hard-to-reach locations.

Tilt and turn handles - These are used to control the opening and closing mechanisms when tilting and turn. They also move windows.

They are the most popular and the majority of uPVC windows have these in place. They are often referred to as 'Bay Windows' in the UK.

If your uPVC window handle is damaged, it can be a major hassle. However, there is no need to replace the entire uPVC window because of a damaged handle. There are a number of easy steps that can be taken to fix and replace a damaged uPVC window handle.