클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Add a ghost immobiliser to your vehicle to protect it from car thieves. Our TASSA verified system protects vehicles against hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden in the wiring loom of your vehicle making it totally invisible to anyone who is looking. It operates by creating an e-pin code push sequence that is pushed through buttons already on the steering wheel doors, door cards and the centre console.

No circuit cuts

It's not a surprise that people want to protect the vehicle they have put so much effort into buying. However, traditional security systems like alarms and wheel locks could easily be snatched away or bypassed by thieves. A ghost immobiliser on the other hand, is a highly effective solution that works silently and is not easily detected by modern thieves.

Ghost immobilisers are hidden device that connects to your vehicle's CAN data network to shut down the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU by using buttons on the steering wheel, dash and door panels to create a unique pin code that you only are aware of. The code can be changed at any time, and can include up to 20 numbers based on your preferences. It also comes with a safe emergency code that you can utilize should you forget your PIN.

The ghost immobiliser could also be used to stop relay boxes from transmitting your car key's signal from inside your home, which could unlock the doors and then start the vehicle. It can also block sophisticated methods to steal your vehicle, like OBD port hacking. The device is small and weatherproof, so it's difficult to detect and is even more difficult to interfere with.

The ghost immobiliser comes with a further benefit: it can be installed in your vehicle without leaving permanent marks. This makes it ideal for those who are planning to sell their car in the future. It's also a lot quicker and simpler to install than an original factory-fitted system.

The Autowatch Ghost, a revolutionary new-generation device, Autowatch Ghost Immobiliser Fitting prevents contactless car thefts by connecting to a vehicle's CAN network and using the buttons to generate an unique PIN code. It is a devious device that can be set up without removing wires, and does not require additional key fobs. It is also connected to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA-certified and is compatible with an International Security Register. Owners will have peace of mind knowing that their vehicle is protected from theft.

No scanning by RF

You will want to protect your vehicle from theft if have spent an enormous amount of money and effort to customize it. One method to do this is by installing an immobiliser. It will stop the engine from starting until you enter a unique PIN code. You can generate a 20-digit code by pressing the buttons on your dashboard and the steering wheel. This will ensure that only you are able to drive your car. It is also possible to set up a service or valet mode, Autowatch Ghost Immobiliser Fitting which allows you to start your car for a short period without having to enter the PIN code. This will permit the technician to work on your vehicle without you being present. This feature is great for those who wish to save time and simplify their lives.

A ghost immobiliser installers near me immobiliser is a next-generation device that connects to your vehicle's CAN data network and utilizes the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend in with the rest of your vehicle, since it doesn't emit any noise or LED indicator. It can be installed anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy system is TASSA approved and can reduce the cost of insurance. It has a tracking feature that will locate your vehicle even if it's stolen. This is a great feature for those who own a unique expensive vehicle which you've invested a lot of effort customizing.

The Autowatch Ghost Immobiliser Fitting Ghost can be used together with an iPhone application that allows you to start your car remotely if you forgot your PIN or not able to access the vehicle due to a reason. This feature is ideal for those who need to run errands or drop off your kids, but do not want to let someone else drive your vehicle. It can also be helpful if you need to take your vehicle to a mechanic for maintenance or repair.

The Ghost is unique in that it does not transmit or detect radio frequency which means it's not detected by thieves who use RF scanning and code grabbing techniques. It also shields your vehicle from key duplicates, ECU swapping and other common methods of car theft.

No key to cloning

Ghost immobilisers can be an excellent way to safeguard top-end vehicles and stop key cloning. They stop your vehicle from starting without a PIN code being entered in conjunction with the standard key fob. This makes it very difficult for thieves to rob your vehicle and can also stop them from trying it in the first place. This is a great option if you've invested an enormous amount of time and money in making your vehicle unique or have a unique or expensive model.

The immobilisers are connected to the vehicle's CAN network and are completely hidden, meaning that their presence is not evident. It is also impossible for thieves to identify the device using radio frequency scanning or code technology for grabbing. This means that a burglar would need to take longer to take your vehicle.

To bypass the system thieves need to be aware of the unique pin code and the location of the Ghost. However, the pin code is unique to you and can be changed as many times as you want. The pin code you select is simple to remember, however, it is mathematically impossible for anyone else to understand. The engineer will also provide an emergency pin code in case you forget your pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any part of your vehicle. It works with all vehicles and is completely customizable to match the style of your vehicle. It is also easy to use and cost-effective. You can even transfer the device to another vehicle if you switch vehicles during the course of ownership, providing that the new vehicle is compatible with it.

The CAN bus is compatible with other security features. For instance, it could detect damage to your vehicle and warn the owner. It also can stop the engine if the car is damaged. The system also protects your vehicle from hacking and key cloning. It can also detect vibrations or contact with the vehicle. In addition, it could notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden immobiliser module connected to the CAN data network of your vehicle which prevents a thief from hacking into your car to disable the alarm, or deactivate the key fob, and then code new keys. This technology is a major improvement over the methods used by thieves in the past to steal your vehicle. The CAN data networks means that your system won't be affected when you disconnect or change your battery.

The Autowatch Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking and copy-cat car theft. It does not use LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves can utilize diagnostics to identify circuit breakages in your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof, does not require additional wiring, and can't be detected by professional diagnostic tools. It can be put in on vehicles equipped with anti-theft systems.

A Ghost immobiliser comes with a major benefit: your vehicle can only be started by a person who knows your PIN and has physical access to your vehicle. This is a major benefit over traditional security systems which are able to be bypassed using cable alteration, a screwdriver or a universal remote controller.

You can easily reset your PIN if forget it using the emergency PIN override feature on mobile phones or computers. This is useful if want to start your vehicle after having left it in a garage or with a valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It has an RFID fingerprint system that can identify specific parts that allow for the return of stolen items if they are found. It can also be turned into a service mode', which allows the engine to start when your car is parked in a garage or with valet parking however, you must enter your PIN code once more to exit the car.