클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out over time and will need to be replaced. It is crucial to keep the same dimensions as the old uvpc window handles when replacing them.

The top screw's position as well as the lever and keyhole sizes are the three measurements you have to determine. Check the size guide for assistance with this.

Inline Lever/Lever

A lever door handle is a contemporary handle that can be used on doors that are new or replacement. This kind door handle is offered in a wide range of styles and finishes. This handle is available from several manufacturers, including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite handles are made of tough materials and are perfect for doors with multiple points that require a robust design. The handles are inline and work from the same spindle and screw fixings, so they can be easily fitted to doors made of uPVC/Composite, either new or old aluminium window handles.

The sprung lever design allows the handle to be positioned and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200 000 cycles. This helps to ensure that the finish is of high quality and performance over time. The sprung lever is also adjustable to fit a broad range of locks. This is useful for doors with narrower openings where the cylinder is further back from the door. A shorter lever can be used on doors with latches which can be operated with the thumb located on the inside.

Lever Pad

The lever pad upvc handle is distinct from the lever handles that are found on most doors. These handles are operated by one spindle or two spindles, inline or offset. They are typically employed on UPVC double glazing handles double glazed window handles doors. They come in many variations & finishes.

The handles are available in a variety of finishes including White chrome, and Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for its intended use.

All of the UPVC lever pad designs are supplied with screws and a spindle which allow them to be installed on a new or existing uPVC door. The backplate fixing centers of 211mm permit a bigger size of handle which can often be a benefit when replacing a faulty or worn multi-point door lock mechanism. The levers for these handles have springs, which can solve the issue of door handles that move out of the horizontal position when they are not being used.

It is important to ensure that the dimensions of the PZ for both the multipoint lock as well as the uPVC doors when selecting a replacement UPVC spindle and handle. This measurement is also referred to as the "handle centre" or "cylinder centres which is a crucial aspect to match the correct handles.

When you have the right PZ size, you'll need to ensure that the lever pads and push pads are a appropriate shape to accommodate the American with Disabilities Act (ADA) compliant handles that you need for your doors. They are typically square or round with an internal lever, and an external push pad.

The majority of UPVC Lever Pads we offer are sprung. This means they will return to a horizontal position when not being used, rather than hanging and possibly sticking in the frame. This stops draughts and cold air from entering a property. The majority of UPVC lever pad style handles are available in left and right handed versions which allows them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks are found on uPVC and other kinds of doors. They work by using a key that unlock a cylinder case that will reveal pins that can be aligned with the pins in the lock body and allow them to rotate an revolving cam, opening the door. Euro cylinders can be equipped with up to six pins with external and internal doors generally requiring different levels of security.

Selecting the right cylinder for your needs is crucial; it is dependent on how your doors and handles are used. For instance, doors that are external require a more secure cylinder while doors inside can be secured using the standard cylinder. Some cylinders have extra features that increase security, for instance, anti-drill or anti-bump properties.

A euro cylinder needs to be measured accurately to ensure that it is the correct size for your door. The cylinder needs to be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn, if there is one. It is best to do this while the lock is in place however, when this isn't possible, you can remove it to measure. It is essential to not have a extension of the cylinder beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.

Most modern cylinders are constructed with anti-drill and bump resistance features built into their design. They are designed to minimize attack chances by forcing the cylinders to rotate in a new direction. This will help deflect the attack, and protect your door.

There are cylinders constructed to resist snapping. This is a typical attack on cylinders. A specific tool is used to break the break line of the lock, and then the front of cylinder is snapped off. This is a lot faster and more straightforward than opening the door with a multipoint lock and leaves no evidence of a burglary, which can impede the insurance claim.

Spring Cassette

This spring cassette is found in the base plate of your door handle. It is a spring-loaded solution to help return your multipoint lock handles back to their normal position after use. The handles had no spring, and would slide when the locking mechanism was disengaged. This simple feature is one of the most effective ways to fix this, and is a great way to prevent your upvc doors from getting stuck in the open or closed position, as these aren't always easy to close manually.

These spring cassettes were created to be used with a sprung multipoint locks. They are not compatible with handles that are not sprung and you'll have to cut a hole into your backplate in order for them to fit. (Please see the image for a detailed diagram). These cassettes are a replacement to broken or missing cassettes that are in the backplate of uPVC door handles. They are available as a single unit. They have a square-cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a great value for money solution to the issue of your door handles that are sagging. They are simple to put in and will extend the life span of your uPVC doors. For more information on our selection of uPVC accessories and spares, please feel free to get in touch with our team. We are on hand to help and happy to offer expert advice.