클잼 로고

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. This system is discreet & does not require any additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be modified up to 20 times. This will allow your vehicle to start.

Simple PIN code Change Process

With the rising rate of vehicle theft, a lot of owners are looking to improve their security. There are a myriad of aftermarket security devices available including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your car. A tracking system may assist you in locating your car if it is stolen, but it will not stop the crime. Immobilisers, on the other hand does exactly what it says on the tin: it shuts down the engine of your car so that it cannot be started. The autowatch ghost installers birmingham Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

The ghost device makes use of the buttons on your car to generate an unique sequence that needs to be entered in order for the engine to start. This can be done via the indicator stalk, window or heater buttons. In addition, there is also an app for mobile devices that can act as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This option is particularly useful when you need to give your car away for valet parking or maintenance because the immobiliser will still be activated, but not disabled.

The Ghost is a unique and ingenious device that is used in conjunction with the buttons on your vehicle instead of being a separate unit. It's not just an effective deterrent to vehicle theft however, it can be used to secure any future vehicles you own. This makes it a better investment than a conventional wheel lock.

Small, weatherproof device

The autowatch audi rs6 ghost installer installation (official Autogenmotors blog) Ghost Immobiliser is a high-tech security device that shields your pride & joy from key hacking and cloning. It also prevents ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus to shut down the engine. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure it is compatible with all vehicles. It also is resistant to jamming devices that are a popular method used by car thieves to bypass immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons on your vehicle like the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. The sequence can be extended to 20 presses to provide additional security. The iPhone app lets you make only one, authenticated connection with the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine can only be started only if a valid PIN is entered. It is able to be operated temporarily in valet or service mode (with parameters set such as 30mph speed limit) and, therefore, you can give your car to a valet or service without having to enter an entry code.

Every vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device detects electronic signals to block your car's system from performing its normal start-up routine until you input an individual passcode. The system can be activated or deactivated by using your smartphone's application without the need for wires.

The standard factory immobilisers function by using a transponder that is integrated into the key. This transmits a signal to the ECU. If the correct code is sent the car will begin however if the transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was created by a South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning and even key theft. Only by physically towing your car away from thieves could they steal it and not be able to drive it.

ghost installers near me makes use of the buttons on your car, such as the indicator stalk, steering wheel and door panels to create an unique PIN sequence that can be changed that needs to be entered before you are able to use your car. It does this without additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are not able to use sophisticated RF scanning or code grabbing techniques to detect that a security system has been installed.

Ghost is harder to remove than car alarms that require disarming with the buttons. This makes it an excellent addition to a GPS tracking device that can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You do not have to go far on social media to see stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser fights this and gives you an additional layer of protection to stop your vehicle from being stolen if it is targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel, and the centre console. This unique PIN is entered in conjunction with the original key fob to prevent the engine from getting started. The unique override pin is found on a black plastic card that you will receive after your installation. It is easy to remember because there aren't any LED indicators.

The device is hidden in the vehicle's wires, and does not emit radio signals, therefore it isn't able to be detected by modern criminals using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to an alarm.

Unlike most other security systems that have a relay in the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, however this must be specified before installing the device. They also work with service/valet modes and is a great alternative to a tracker device when you take your car to the dealer for an electrical issue.

Service/Valet mode

In recent years there has been a increase in the number of vehicles being stolen with no owner's keys. It is easier than ever to steal your pride & joy thanks to the availability cost of ghost immobiliser key cloning tools and door lock picks. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your car has been hijacked.

It connects directly to your car's ECU (Engine Control Unit) via the data loop of CAN. It's completely silent since it doesn't use radio frequency or a key fob. This means that it can't be detected by diagnostics or other car hacking devices. It also prevents you from adding the new ECU or key how to install ghost immobiliser bypass the system because only the PIN number allows the engine to start.

The device is hidden inside your car using existing buttons on the steering wheel, centre console & door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered before you can start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car being driven away or started in the event that a PIN code hasn't been entered before. If you are driving away with the device armed it will display an indicator on your dashboard and flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN in this moment the indicator will continue to flash and require a new PIN code every time you try to start your car.